Last year, Charley, Frances, Ivan, and Jeanne brought more claim adjusters to Florida than swampland speculators in the 1920s. At last count, the Fearsome Foursome generated more than two million property claims. Just the sheer number of claims required adjusters to increase productivity to meet the demands of homeowners.
No matter where claims occur, filing them quickly, accurately, and efficiently is the main goal of every professional property adjuster. Increasing productivity also will increase independent adjusters' incomes. Saving time does not necessarily mean cutting quality, however. Adjusters can employ some basic techniques to avoid common mistakes and to save time.
Having a routine means doing the same activities in the same order every time. Developing a routine will keep adjusters organized and prevent them from forgetting vital steps in the claim process. Decide the order in which to examine the property and stick with it each time. Record and scope damages in the same order for each damaged area or room. Deviating from a set routine can lead one to overlook an important detail.
Be methodical and measure rooms to the exact inch. Remember to include all closets and offsets, even if they do not appear damaged. Draw accurate diagrams of each room or area, and take lots of photographs. It also helps to develop a checklist or tick sheet of repair items and mark them off throughout the examination of the property.
Most importantly, do not let anyone or anything distract from the routine. Scope the loss alone whenever possible. Most property owners will want to walk and talk with the adjuster as he conducts the examination. Because this may be due to anxiety over their loss or curiosity concerning the adjusting process, it is a good idea to spend a little time with policyholders before beginning the inspection in order to develop a rapport.
Explain the specific routine to policyholders and assure them that the process will provide for the most efficient examination of the property. Ask policyholders whether there is anything that they would like to discuss prior to the walk-through of the property. Check in with them before leaving the premises.
After completing the damage assessment, review the scope of the examination with policyholders. Briefly explain the procedure and what the next steps are. Be realistic about all timetables. This is a good time to ask policyholders whether they have any questions. Remember to provide them with all relevant contact information.
Be familiar with the policy and coverage of the property that is the subject of the claim. It is important to know what is covered and what is not. It can help adjusters to avoid expending time on unnecessary areas or details.
In addition, when using claim-estimating, GPS, or reporting software, become familiar with it before going to the property or catastrophic event. Take the time to learn the software in the off season, not while on the premises or on the way to the job. It will allow for a quicker inspection if the adjuster is not trying to learn how to use a software program and inspect damages at the same time.
Some companies require the use of specific software, so know in advance which programs will be mandatory for the company that will be paying the claim. Practice using the software's basic features and become familiar with the program's time-saving, power user features, if possible. All of the leading software providers offer CD or Internet-based learning tools. Take advantage of their training classes when time permits.
It's hard for most independent adjusters to "just say no," but with another above-average hurricane season on the horizon, it is easy to become overworked and over-committed. Remember to pace work accordingly, and do not take on more claims than is realistic.
When too many appointments are scheduled on a given day, there is a tendency to hurry through each inspection. This is a formula for disaster, and creates the conditions under which most mistakes occur. Space out the appointments like the cable guy ("I'll be at your house between 9:00 am and noon"). Make every effort to complete claim and estimate paperwork the same day of the inspection, while the memory is still fresh.
Avoid Common Mistakes
Deduct wall openings It is important to deduct wall openings, such as windows and doors, in estimates. The additional wall square-footage amounts resulting from the failure of entering wall-opening information increases the cost for most wall-repair items, such as drywall, paint, and wallpaper.
This is especially true when entering closet measurements. Most closets contain some type of door opening, which is either single- or double-width. If closet door openings are not deducted from estimates, errors can result when calculating items such as drywall. For example, entering the closet opening subtracts not only the drywall from the main area of the room but also from the interior of the closet. This is the same for any finish later applied to the drywall, such as paint, wallpaper, or paneling.
In the past, estimators have hesitated to subtract door and window openings when calculating wall areas in building estimates. One reason is that the calculations are difficult and there is a school of thought that these areas should be left in an allowance for waste.
Because many of today's computer programs make it easy to calculate and remove these openings from the total wall square-foot calculation, in addition to the fact that many wall finish unit costs include waste and preparation time, properly trained adjusters should include all wall opening information. Although contractors may argue that this wall area be left in the estimate to cover the cost of labor for having to work around the openings, most of today's cost databases take into account the repair nature of the work being performed.
Deducting wall openings will not only make estimates more accurate, but will give adjusters more margin to adjust estimates if negotiations with restoration contractors become necessary.
Measure Properly Before adjusting software, many estimators rounded room areas to the nearest foot or half-foot in order to simplify calculations. This no longer necessary, with the advent of computers. It has been reported, however, that many adjusters still measure areas this way. Estimators also have a tendency to round up, possibly causing higher estimate totals than necessary.
When entering a room's measurements, including offset and closet dimensions, into the software program, they should be accurate to the inch. Many of a room's repair quantities are affected directly by its measurements.
All computer estimating systems make to-the-inch calculations easy. Enter these values properly. If the resulting calculation requires some adjustment due to the nature of the material being replaced (i.e., 12-foot rolls of carpet or 60-foot double rolls of wall covering), adjustments can be made after speaking with the installing contractor.
Repair only affected areas At times, it may not be necessary to replace an area's entire floor, wall, or ceiling. In such cases, estimators should make the proper allowances to get a more accurate assessment of the cost of repairing damaged areas.
Watch minimum charges Fre-quently, minimum charges are overused or abused. In many instances, estimators use the same trade minimum charge in multiple rooms. Minimum charges should only be applied at a one-per-trade, per-estimate rate.
The overuse of minimum charges almost always results in overestimation of the loss. Claim-estimating software allows adjusters to enter exact area quantities throughout multi-room estimates. Estimators then can check the estimate's trade and sub-trade breakdowns to see whether minimums are being met. Some systems include minimum charge auditing features that review estimates to ensure that all trade minimums are satisfied.
Avoid finish misapplication Some items, such as wood flooring, paneling, and cabinetry, may be installed with finishes already applied to the material. It is important to distinguish such instances so that the cost of additional coats of paint or finishes are added to estimates.
For example, a claim covering the cost of replacing acoustical ceiling finishes included the cost of painting the new ceiling. Paint was included in the blown materials, however, and the additional coat was unnecessary. Very often, the only instance in which painting acoustic ceilings is necessary is if spot repairs being estimated.
The goal of any property adjuster is to file claims accurately, cost-effectively, and as quickly as possible. By streamlining routines and avoiding common mistakes, adjusters can save time and money not only for themselves, but for carriers. All this is possible, while still providing good customer service.
John Postava is the president of Simsol Software.